Step 1 - Download the Snappic Mac Print Server on your Mac.
You will find the Snappic Mac Print Server on the ‘Resources’ tab on your account dashboard.

Step 2 - Connect your printer via USB to the Mac.
Ensure the printer is powered on and has been set to the default printer.

Step 3 - Now open the Snappic Mac Print Server on your Mac and click here to follow the How To Configure the Print Server guide below for Standard and Strip prints.

Step 4 - Wired: Make sure the iPad is connected with a lightning cable to the Mac and shows up in iTunes.
               Or Wireless:
Make sure that the iPad and Mac you are using are both connected to the same hotspot/wifi connection if you are using a wireless setup.
Please note we do not recommend using the wifi/internet connection supplied at the venue as the connection can have a security setting that blocks the communication between the iPad and print server.

Step 5 - You can now configure the printer on the iPad by opening the event on your iPad and tapping on the "Configure Printer" button. A pop up will appear.

Step 6 - On the pop up, select the "Photo Booth Print Server" option with the word "wireless" underneath if you have connected the iPad and laptop via a wifi connection or select the "Photo Booth Print Server" option with the word "USB" underneath if you have connected the iPad to the laptop with a cable.

Step 7 - You are now ready to start the event, capture some awesome moments and print them out. 

Did this answer your question?