This article will show you how to setup your printer with the Snappic Windows Print Server.
Option 1: Setting up a wireless connection (using a wifi network to connect the iPad and windows device/laptop)
Option 2: Setting up a wired connection (wired referring to the iPad being plugged into the windows device/laptop)

Option 1: Wireless Printing

Step 1 -
 Download the Snappic Windows Print Server onto the Windows device/laptop you will be connecting your printer to. You can find the Snappic Windows Print Server under the "Resources" tab on your account dashboard.

Step 2 - Now install Bonjour on your Windows device/laptop  
(Download Bonjour for windows).

Step 3 - Now make sure you do not have any firewalls on the Windows device/laptop as they will block communication with the iPad.

Step 4 -
Connect your printer via USB to the Windows device/laptop and make sure it is powered on and set as the default printer.

Step 5 - Make sure that the iPad and Windows device/laptop you are using are both connected to the same hotspot/wifi connection.
Please note we do not recommend using the wifi supplied at the venue as the connection can have a security setting that blocks the communication between the iPad and print server. 

Step 6 - Now you can open the print server on your Windows device/laptop and configure the printer for Standard and Strip prints - to read more about this scroll to the section Configuring the Snappic Windows Print Server.

Step 7 - You can now configure the printer on the iPad by opening the event on your iPad and tapping on the "Configure Printer" button. A pop up will appear.

Step 8 - On the pop up, select the "Photo Booth Print Server" option with the word "wireless". 

Step 9 - You are now ready to start the event, capture some awesome moments and print them out. 

Option 2: Wired Printing

Step 1 -
 Download the Snappic Windows Print Server onto the Windows device/laptop you will be connecting your printer to. You can find the Snappic Windows Print Server under the "Resources" tab on your account dashboard.

Step 2 - Now install Bonjour on your Windows device/laptop  
(Download Bonjour for windows) 

Step 3 - Connect your printer via USB to the Windows device/laptop and make sure it is powered on and set as the default printer.

Step 4 - Now download iTunes onto the Windows device/laptop and open it. 

Step 5 - Connect your iPad to the Windows device/laptop with a lightning cable and make sure that the iPad is showing up on iTunes (this just makes sure that the iPad is connected properly to the device). 

Step 6 - Now you can open the print server on your Windows device/laptop and configure the printer for Standard and Strip prints - to read more about this scroll to the section Configuring the Snappic Windows Print Server.

Step 7 - You can now configure the printer on the iPad by opening the event on your iPad and tapping on the "Configure Printer" button. A pop up will appear.

Step 8 - On the pop up, select the "Photo Booth Print Server" option with the word  "USB" underneath.

Step 9 - You are now ready to start the event, capture some awesome moments and print them out. 


Configuring the Snappic Windows Print Server

Step 1 - To configure the Snappic Windows Print Server you will need to:
For standard prints (for 6x4/4x6 print outs) - click on the tab that says "Standard Config" and then click the "Edit" button and the below window should pop up.
For strip prints (for 2x6) - click on the tab that says "Strip Config" and then click the "Edit" button and the below window should pop up.

Step 2 - Next you will click on the "Advanced" button then select your paper size. If you are under the "Standard Config" tab then you will choose 4x6/6x4 and if you are under the "Strip Config" tab then you will choose the 4x6x2 option or simply enable the 2inch cut on a 4x6 depending on what printer you are using. 

Did this answer your question?